No products in the cart.
Sale
Looking for better water pressure without excessive pump noise? Explore the DSmart 500 smart water booster pump at Keable Electrical Supply Limited.
The DSmart 500 is a pressure-boosting option for properties where controlled water pressure and quieter operation are priorities. Before purchasing, check that the pump suits your water source, plumbing layout and simultaneous demand.
Call Keable Electricals: 0718 821 018
Key Features
The referenced product listing describes:
- Low-noise operation.
- Constant-pressure control.
- A 500W motor with copper winding.
- Water-shortage/dry-run protection.
- Leak-detection, high-temperature and antifreeze functions.
- Water-temperature compatibility up to 75°C.
Confirm the functions and operating conditions of the exact supplied version before installation. “Silent” should not be interpreted as completely inaudible in every location.
DSmart 500 Technical Specifications
| Specification | Details from the referenced listing |
|---|---|
| Product | DSmart 500 Smart Water Booster Pump |
| Model designation | KAP-500PM |
| Motor power | 500W |
| Supply voltage range | 165–260V |
| Frequency | 50/60Hz |
| Maximum flow | 4.8 m³/h / 80 L/min |
| Rated flow | 2 m³/h, approximately 33.3 L/min |
| Maximum head | 45 m |
| Maximum water temperature | 75°C |
These values should be checked against the unit’s nameplate and manual.
Maximum flow and maximum head are separate limits. Do not assume the pump supplies 80 litres per minute at a 45-metre head. Request the performance curve to assess delivery at your required operating point.
Is the DSmart 500 Right for Your Home?
Pump selection starts with your water system rather than the number of rooms alone.
Consider:
- Where the water comes from.
- Tank position and available inlet conditions.
- Height and distance to the outlets.
- How many showers or taps may run together.
- Required flow and pressure.
- Noise expectations and installation location.
A pump suitable for one property may not provide the required performance in another.
Shower Pressure and Water-Heater Compatibility
If weak shower flow is your main concern, assess the cause before adding a pump.
Restrictions, blocked filters or inadequate water availability may need attention first. Any proposed pressure increase must also remain within the shower, mixer and water heater’s permitted operating limits.
A pump’s ability to handle warm water does not automatically establish compatibility with every heater or hot-water arrangement.
Explore Shower Pressure Pump Installation Nairobi →
Choosing a Quieter Installation
When noise matters, discuss the complete installation—not only the pump description.
Suitable positioning, mounting and pipe connections can influence the sound and vibration experienced inside the property. Consider maintenance access and proximity to bedrooms or living spaces when choosing a location.
Ask Keable about available product documentation and suitable installation arrangements before ordering.
DSmart 500 Supply & Installation in Nairobi
Contact Keable Electricals to discuss supply and installation requirements.
A complete quotation should identify:
- The pump and supplied accessories.
- Required valves and plumbing connections.
- Electrical materials and protection.
- Any additional controls.
- Mounting and installation labour.
- Testing and commissioning.
Request Booster Pump Installation Nairobi →
DSmart 500 Booster Pump Price in Kenya
Check the live product price or contact Keable for a quotation.
Confirm whether the quoted amount includes VAT, delivery, installation and accessories. Warranty terms and package contents should be stated clearly before purchase.
Frequently Asked Questions
Is the DSmart 500 completely silent?
Do not assume completely silent operation. Noise depends on the equipment, mounting, location and operating conditions.
Can it supply several bathrooms?
Suitability depends on simultaneous demand, elevation, pipe losses and required outlet pressure. Share your layout before selecting the pump.
Does maximum head mean it can serve any building below that height?
No. The required flow and total system head must be assessed together using the performance curve.
Can I use it with my existing water heater?
Only after compatibility and permitted pressure conditions have been checked.
Does the price include installation?
Confirm this with Keable. Request an itemised supply-and-installation quotation where needed.
What should I send before ordering?
Send your location, tank and pipework photographs, number of outlets, pressure complaint and connected heater details.
Order Your DSmart 500 Booster Pump
Get help checking the pump against your property’s requirements before purchasing.
Call/WhatsApp Keable Electricals: 0718 821 018
Order by 2PM to get delivered next working day! We use 24 hours service with carriers in most cases so that you can get your order delivered on time.
There is £4.99 charge for delivery under £50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.
There is £4.99 charge for delivery under £50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.
DSmart 500 Smart Water Booster Pump – 500W
Original price was: KSh 40,000.00.KSh 36,000.00Current price is: KSh 36,000.00.
DSmart 500 Technical Specifications
| Specification | Details from the referenced listing |
|---|---|
| Product | DSmart 500 Smart Water Booster Pump |
| Model designation | KAP-500PM |
| Motor power | 500W |
| Supply voltage range | 165–260V |
| Frequency | 50/60Hz |
| Maximum flow | 4.8 m³/h / 80 L/min |
| Rated flow | 2 m³/h, approximately 33.3 L/min |
| Maximum head | 45 m |
| Maximum water temperature | 75°C |
Looking for better water pressure without excessive pump noise? Explore the DSmart 500 smart water booster pump at Keable Electrical Supply Limited.
The DSmart 500 is a pressure-boosting option for properties where controlled water pressure and quieter operation are priorities. Before purchasing, check that the pump suits your water source, plumbing layout and simultaneous demand.
Call Keable Electricals: 0718 821 018
Key Features
The referenced product listing describes:
- Low-noise operation.
- Constant-pressure control.
- A 500W motor with copper winding.
- Water-shortage/dry-run protection.
- Leak-detection, high-temperature and antifreeze functions.
- Water-temperature compatibility up to 75°C.
Confirm the functions and operating conditions of the exact supplied version before installation. “Silent” should not be interpreted as completely inaudible in every location.
DSmart 500 Technical Specifications
| Specification | Details from the referenced listing |
|---|---|
| Product | DSmart 500 Smart Water Booster Pump |
| Model designation | KAP-500PM |
| Motor power | 500W |
| Supply voltage range | 165–260V |
| Frequency | 50/60Hz |
| Maximum flow | 4.8 m³/h / 80 L/min |
| Rated flow | 2 m³/h, approximately 33.3 L/min |
| Maximum head | 45 m |
| Maximum water temperature | 75°C |
These values should be checked against the unit’s nameplate and manual.
Maximum flow and maximum head are separate limits. Do not assume the pump supplies 80 litres per minute at a 45-metre head. Request the performance curve to assess delivery at your required operating point.
Is the DSmart 500 Right for Your Home?
Pump selection starts with your water system rather than the number of rooms alone.
Consider:
- Where the water comes from.
- Tank position and available inlet conditions.
- Height and distance to the outlets.
- How many showers or taps may run together.
- Required flow and pressure.
- Noise expectations and installation location.
A pump suitable for one property may not provide the required performance in another.
Shower Pressure and Water-Heater Compatibility
If weak shower flow is your main concern, assess the cause before adding a pump.
Restrictions, blocked filters or inadequate water availability may need attention first. Any proposed pressure increase must also remain within the shower, mixer and water heater’s permitted operating limits.
A pump’s ability to handle warm water does not automatically establish compatibility with every heater or hot-water arrangement.
Explore Shower Pressure Pump Installation Nairobi →
Choosing a Quieter Installation
When noise matters, discuss the complete installation—not only the pump description.
Suitable positioning, mounting and pipe connections can influence the sound and vibration experienced inside the property. Consider maintenance access and proximity to bedrooms or living spaces when choosing a location.
Ask Keable about available product documentation and suitable installation arrangements before ordering.
DSmart 500 Supply & Installation in Nairobi
Contact Keable Electricals to discuss supply and installation requirements.
A complete quotation should identify:
- The pump and supplied accessories.
- Required valves and plumbing connections.
- Electrical materials and protection.
- Any additional controls.
- Mounting and installation labour.
- Testing and commissioning.
Request Booster Pump Installation Nairobi →
DSmart 500 Booster Pump Price in Kenya
Check the live product price or contact Keable for a quotation.
Confirm whether the quoted amount includes VAT, delivery, installation and accessories. Warranty terms and package contents should be stated clearly before purchase.
Frequently Asked Questions
Is the DSmart 500 completely silent?
Do not assume completely silent operation. Noise depends on the equipment, mounting, location and operating conditions.
Can it supply several bathrooms?
Suitability depends on simultaneous demand, elevation, pipe losses and required outlet pressure. Share your layout before selecting the pump.
Does maximum head mean it can serve any building below that height?
No. The required flow and total system head must be assessed together using the performance curve.
Can I use it with my existing water heater?
Only after compatibility and permitted pressure conditions have been checked.
Does the price include installation?
Confirm this with Keable. Request an itemised supply-and-installation quotation where needed.
What should I send before ordering?
Send your location, tank and pipework photographs, number of outlets, pressure complaint and connected heater details.
Order Your DSmart 500 Booster Pump
Get help checking the pump against your property’s requirements before purchasing.
Call/WhatsApp Keable Electricals: 0718 821 018
Order by 2PM to get delivered next working day! We use 24 hours service with carriers in most cases so that you can get your order delivered on time.
There is £4.99 charge for delivery under £50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.
There is £4.99 charge for delivery under £50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.
Reviews
There are no reviews yet.
In stock
Please, activate Wishlist option to use this widget.
Please, activate Compare option to use this widget.
- Free shipping on all orders above 50,00
- No hassle returns, 30 days return
- Next day delivery within your country
Got Questions?
Feel free to Get in touch
Feel free to Get in touch
Related products
DSmart 500 Smart Water Booster... Original price was: KSh 40,000.00.KSh 36,000.00Current price is: KSh 36,000.00.
More
More
- Switches & Sockets
Home Improvement
Accessories
- Home & Appliances
Power Tools
Accessories
New Products
12W Folded Spot Linear Magnetic Track Light – Black, 6000K
Original price was: KSh 1,500.00.KSh 1,200.00Current price is: KSh 1,200.00.
12W Linear Diffused Magnetic Track Light – Black, 3000K Warm White
Original price was: KSh 1,200.00.KSh 1,000.00Current price is: KSh 1,000.00.
12W Magnetic Track Grille Light – 3000K Warm White, CRI Ra90
Original price was: KSh 1,200.00.KSh 1,000.00Current price is: KSh 1,000.00.
Reviews
There are no reviews yet.