Power your compatible magnetic track lighting system with the AUKO 100W Surface Magnetic Track Light Power Supply from Keable Electricals.

This unit converts 180–265V AC input into 48V DC output for compatible DC48V magnetic track lights. It supports an input frequency of 50/60Hz and has a stated maximum output current of 2A.

Before ordering, confirm the power supply’s physical fit and load capacity against your track system and connected light fittings.

Key Features

• AUKO brand: Identifies the manufacturer for product matching and enquiries.
• 100W stated capacity: Check the manufacturer’s loading instructions when sizing your installation.
• 180–265V AC input: Covers nominal 220–240V mains supplies.
• 50/60Hz input frequency: Supports either frequency within the specified input requirements.
• 48V DC output, ±2%: For lighting systems requiring compatible DC48V power.
• Maximum 2A output: Must be considered alongside the stated wattage when calculating the connected load.

Technical Specifications

Check the Load Before Installation

Add together the wattages of all fittings connected to the power supply, then check the total against the manufacturer’s permitted load.

Important specification check: At the nominal output voltage, 48V × 2A = 96W. This is slightly below the stated 100W capacity. Confirm the manufacturer’s rated continuous output and any required operating headroom before selecting the final number of lights.

 Voltage and Compatibility Warning

FOR COMPATIBLE DC48V MAGNETIC TRACK LIGHTING SYSTEMS ONLY.

Do not use the 48V DC output with lights requiring 12V, 24V or direct mains input.

Have a qualified installer confirm mains wiring, output polarity, ventilation, track compatibility and total connected load.

Frequently Asked Questions

What does this power supply do?

It converts AC electricity within its specified input range into 48V DC for compatible magnetic track lighting.

Is it suitable for a nominal 240V supply?

A nominal 240V supply falls within the stated 180–265V AC input range. Installation must meet the manufacturer’s requirements.

Can it power DC48V magnetic track lights?

Yes, provided the lights, track connections and total load are compatible with the power supply.

Can I connect a full 100W lighting load?

Confirm this with the manufacturer before installation. The stated 48V output and maximum 2A current correspond to 96W at nominal voltage, so the final loading limit needs verification.

Is it dimmable?

Dimming capability has not been specified. Confirm compatibility if your system requires dimming.

Will it fit inside my surface magnetic track?

Dimensions and connector details have not been provided. Confirm physical compatibility before ordering.

Is it suitable for outdoor use?

An IP rating has not been specified. Confirm its installation rating before use outdoors or in damp locations.

Order from Keable Electricals

Looking for an AUKO 100W magnetic track light power supply in Kenya? Contact Keable Electricals for current pricing, availability and compatibility checks.

Ask for the AUKO Surface Magnetic Track Power Supply — 180–265V AC Input, 48V DC Output, Maximum 2A.

Call or WhatsApp: 0718 821018

Enquiry button: Request Price on WhatsApp