Power your compatible magnetic track lighting system with the 48V 200W LED Driver from Keable Electricals. This power supply converts 170–265V AC input into 48V DC output for magnetic track lights designed to operate at DC48V.

With a stated output current of 4.1A and output power range of 20–200W, it provides the power conversion needed between your mains supply and compatible track lighting system.

Key Features

• 48V DC output: For compatible DC48V magnetic track lighting systems.
• 170–265V AC input range: Check that your supply falls within this range.
• 200W stated power rating: Size the connected lighting load using the recommended limit below.
• 4.1A stated output current: An essential specification when checking system compatibility.
• 20–200W stated output power range: Confirm suitability for your planned lighting load before installation.

Technical Specifications

 Important Load and Compatibility Warning

Keep the total connected lighting load at or below 160W, following the stated recommendation to use no more than 80% of the 200W rating. This leaves operating headroom and supports longevity.

The 80% recommendation is a loading limit, not an efficiency rating.

Use only with compatible DC48V lights and track components. Have a qualified installer confirm wiring, polarity, ventilation and installation requirements.

How Many 12W Magnetic Track Lights Can It Power?

Using the recommended 160W load ceiling:

By wattage calculation, 13 × 12W fittings = 156W, which falls within the recommended ceiling. Your installer should also check manufacturer requirements, track capacity and cable voltage drop before confirming the final layout.

Frequently Asked Questions

What does this LED driver do?

It converts AC mains input within its specified range into 48V DC for compatible magnetic track lights.

Can it power 12V or 24V lights?

No. Its specified output is 48V DC. Use a power supply that matches the voltage required by your lights.

Should I connect a full 200W lighting load?

Follow the stated 80% loading recommendation, which gives a maximum recommended connected load of 160W.

Is this driver dimmable?

Dimming capability has not been specified. Confirm compatibility before ordering if your lighting system requires dimming.

Will it fit inside my magnetic track?

Physical dimensions and mounting details have not been provided. Confirm whether it suits your track or requires a separate installation location.

Is it suitable for outdoor installation?

An IP rating has not been specified. Confirm its installation rating before using it outdoors or in damp locations.

Order from Keable Electricals

Looking for a 48V magnetic track light power supply in Kenya? Ask Keable Electricals for the 48V 200W LED Driver with 170–265V AC input and 4.1A output.

Send the number and wattage of your light fittings for help checking the required power supply capacity.

Call or WhatsApp: 0718 821018

Enquiry button: Request Price on WhatsApp

Suggested product image alt text: 48V 200W magnetic track light power supply with 170–265V AC input and 48V DC 4.1A output.